Blog Posts RSS
GPS Setup
First you will need to register Tunerstudio to unlock the GPS features. After registering Tunerstudio go up to the communication tab at the top of Tunerstudio, click on “GPS Configuration”. A window will open and you will see a check box at the top of the window, click to enable GPS. Next select which com port the gps is connected to. Typically if the gps was plugged in before powering the powering the PiDash the com port will be USB0. Next select the baud rate, it should be set to 115200. Once everything is set click “Accept” then your done!...
Haltech's 4AG wiring guide
The Toyota 4AG DOHC 16V engine General Information Cylinders 4 Displacement 1587cc Firing Order 1342 Cylinder Orientation (from drivers seat) Cyl1 closest to timing belt Model Variants 4AGE 1st gen Blue Early Big Port - USDM Vane MAF, JDM MAP, T-VIS @4200rpm, 9.4:1 comp. Batch fire injection, distributor ignition, 182cc injectors, 16 valve head 4AGE 2nd gen Red & Black Late Big Port - As above but all are MAP 4AGE 3rd gen Red Small Port - 10.3:1 comp, No T-VIS, stronger internals,USDM use MAF, 235cc injectors 4AG 20V 4th gen "Silver Top" - Switched inlet cam timing, 3x inlet...